E-Tech ET8 Especificações descarregar pdf (Página 162)

100

101

128 IBM BladeCenter JS23 and JS43 Implementation Guide

You can create virtual disks from the View/Modify Virtual Storage window by

selecting the Virtual Disks tab, as described in the following section. The Create

Partition Wizard, as described in 4.7.2, “Partition name and environment” on

page 145, can also be used to create virtual disks. Both methods require free

space in a storage pool.

Creating virtual disks

To create a logical volume, a storage pool must be available. Refer to 4.6.2,

“Storage pools” on page 124, for information about how to create a storage pool.

To create a new virtual disk, start with the View/Modify Virtual Storage window

and select the Virtual Disks tab. From this window, click the Create Virtual Disk

button as shown in Figure 4-36.

Figure 4-36 Create virtual disk

From the Create Virtual Disk window specify the name of the virtual disk, select a

storage pool that will be used from the drop-down box, and specify the virtual

disk size.

Optionally, you can make a partition assignment during virtual disk creation as

shown in Figure 4-37 on page 129. A new virtual disk will be created when you

click OK.

Note: When a virtual disk is created during the Create Partition wizard, the

default naming schema for virtual disks uses the partition ID and the number

of the assigned virtual disk to the LPAR. The result looks like

lp{number}vd{number}.

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 617 618

Comentários a estes Manuais

Sem comentários

E-Tech ET8 Especificações Página 162

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso E-Tech ET8