E-Tech ET8 Manual de Instalação descarregar pdf (Página 23)

PROGRAMMING

E-TECH ET8 (V4) CONTROL PANEL – INSTALLER MANUAL

P57E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

all ON: All zones trigger Siren output

NOTES:

• 0E will turn all selections OFF

MEMORY E will turn all selections ON

SIREN OUTPUT ZONES

Selects the zones to trigger the Siren output.

PROGRAMMING SEQUENCE:

P57E [Zone No]E toggles the options ON and OFF

P57E [Zone No]E OFF: The zone will not trigger the Siren output

P57E [Zone No]E ON: The zone will trigger the Siren output

P58E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

all OFF: No zones trigger AUX1

NOTES:

• 0E will turn all selections OFF

MEMORY E will turn all selections ON

AUX1 OUTPUT ZONES

Selects the zones to trigger the AUX1 output. AUX1 output is Pin1 on the J3

header on the main board.

PROGRAMMING SEQUENCE:

P58E [Zone No]E toggles the options ON and OFF

P58E [Zone No]E OFF: The zone will not trigger the AUX1 output

P58E [Zone No]E ON: The zone will trigger the AUX1 output

P59E

PROGRAM MODE LEVEL:

Installer, Remote by PC

FACTORY DEFAULT:

all OFF: No zones trigger AUX2

NOTES:

• 0E will turn all selections OFF

MEMORY E will turn all selections ON

AUX2 OUTPUT ZONES

Selects the zones to trigger the AUX2 output. AUX2 output is Pin2 on the J3

header on the main board.

PROGRAMMING SEQUENCE:

P59E [Zone No]E toggles the options ON and OFF

P59E [Zone No]E OFF: The zone will not trigger the AUX2 output

P59E [Zone No]E ON: The zone will trigger the AUX2 output

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

Comentários a estes Manuais

Sem comentários

E-Tech ET8 Manual de Instalação Página 23

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso E-Tech ET8